F86SM1/AirDry HotPeel as grade names says textile transfer when printed with water based inks can be air dried in a rack within 2 to 4 hours. It can also be dried in a conveyor oven at low temp. @ 60°C to 90°C. With this feature a blank pass or pre shrink pass is not required. It is compatible with transfers printed with Plastisol / Oil based inks, Solvent based inks & Silicone inks. Compatible with Screen printing, Hybrid printing & Offset Printing processes. Film can Hot or Cold peeled after applying transfers on garment
Soft touch to transfers.
Smooth peel off
Easy Powder Application
Energy Saver
Satin Matte finish to transfer surface
F86SM1/AirDry HotPeel as grade names says textile transfer when printed with water based inks can be air dried in a rack within 2 to 4 hours. It can also be dried in a conveyor oven at low temp. @ 60°C to 90°C. With this feature a blank pass or pre shrink pass is not required. It is compatible with transfers printed with Plastisol / Oil based inks, Solvent based inks & Silicone inks. Compatible with Screen printing, Hybrid printing & Offset Printing processes. Film can Hot or Cold peeled after applying transfers on garment
Grade F86SM1/AirDry HotPeel energy saver and reduces rejections in registration for textile transfer in screen printing process. This is 1 side matte release 11µ & other side antistatic coated . Compatibility with Water based inks for Air Dry, Also compatible with Plastisol inks, Oil based inks, Silicone inks & Solvent inks.
1. | Appearance | Translucent Film |
2. | Base – PET Film | 75µ |
3. | Side 1 Antistatic Coated | 109 Ω – 1010 Ω |
4. | Side 2 Matte release coated | Even & Smooth Finish |
5. | Matte release coating thickness | 11µ (+ / – 2µ) |
6. | Matte value of release coating | 10 GU (+ / – 1GU) |
7. | Standard Size | 485mm X 635mm, Custom size possible.Print Hold Out |
8. | Print Hold Out | Medium to High |
9. | Release force | Medium to Low (Hot & Cold Peel) |
Energy Saver / Easy in registration / Smooth matte coating / Smooth Peel Off / Satin matte finish to transfers.
F86SM1/AirDry HotPeel as grade names says textile transfer when printed with water based inks can be air dried in a rack within 2 to 4 hours. It can also be dried in a conveyor oven at low temp. @ 60°C to 90°C. With this feature a blank pass or pre shrink pass is not required. It is compatible with transfers printed with Oil based inks, Plastisol inks, Solvent based inks & Silicone inks. Can be used in Screen printing, Hybrid printing process & Offset Printing process. Film can hot or cold peeled after applying transfers on garment.
1. | Appearance | Translucent Film |
2. | Base – PET Film | 75µ / 100µ |
3. | Side 1 Antistatic Coated | 109 Ω – 1010 Ω |
4. | Side 2 Matte release coated | Even & Smooth Finish |
5. | Matte release coating thickness | 8µ (+ / – 2µ) |
6. | Matte value of release coating | 8 GU (+ / – 1GU) |
7. | Standard Size | 485mm X 635mm, 510mm X 762mm Custom sizes possible. |
8. | Print Hold Out | Medium to High |
9. | Release force | Medium to High (Cold Peel) |
Transfers can be applied from 140°C to 180°C for 15 to 4 seconds with 2 to 4 bars pressure as required.
1. | Appearance | Translucent Film |
2. | Base – PET Film | 75µ |
3. | Side 1 Antistatic Coated | 109 Ω – 1010 Ω |
4. | Side 2 Matte release coated | Even & Smooth Finish |
5. | Matte release coating thickness | 8µ (+ / – 2µ) |
6. | Matte value of release coating | 10 GU (+ / – 1GU) |
7. | Standard Size | 485mm X 635mm, Custom size possible. |
8. | Print Hold Out | Medium to High |
9. | Release force | Medium to Low (Warm & Cold Peel) |
1. | Appearance | Translucent Film |
2. | Base – PET Film | 75µ |
3. | Side 1 Antistatic Coated | 109 Ω – 1010 Ω |
4. | Side 2 Matte release coated | Even & Smooth Finish |
5. | Matte release coating thickness | 11µ (+ / – 2µ) |
6. | Matte value of release coating | 10 GU (+ / – 1GU) |
7. | Standard Size | A3, A4, Rolls: 600mmX100Mtrs, 300X100Mtrs |
8. | Print Hold Out | Medium to High |
9. | Release force | Medium to Low (Hot & Cold Peel) |
Transfers can be applied from 160°C to 180°C for 30 to 15 seconds with 2 to 4 bars pressure.With certain type of design hot peel is not applicable, but we recommend warm to cold peel to get best results
Our four step process to ensure perfect film of every lot.
Answer:
Answer: Coated side or the matte side of the film is the printing side.
Answer: It is completely dependent on the user of the film.
Size Standard for Ultranex: With tolerance of +/- 2mm lengthwise & + 4mm to 8mm Widthwise.
Answer: Yes, we strongly recommend that blank pass is the process where film will resize with respect to the oven temperature setting used and will greatly benefit registration in screen printing process. We recommend blank pass temperature @ 165°C for 45 Seconds & Printing of colors @ 135°C ( +/- 5%)
If Single color printing + Powder Adhesive is been done blank pass is not required.
Answer:
We recommend following settings for Oven:
NOTES for oven drying process:
Answer: Yes it can if oven setting are not compatible with the film. Please check above Answer 2.4.
Please check following if problem persists Contact Us.
Root Cause is Film / sheets are subjected to excessive temperature.
Answer:Root Cause of low hold out is temporary bond between ink and film coating is not strong
1. If single color printing + Powder Adhesive:
2. If Multicolor Printing + Adhesive + Powder Adhesive:
Answer: Root Cause is RE size of screen image or substrate (Sheets).
Answer: There are several reasons for powder sticking as following:
Italy | Russia | Turkey | SriLanka | Netherlands | Brazil | Egypt | Spain | Portugal |
Poland | Korea | Dubai | USA | Japaan | Mexico